Metal shop ef-2 vfd in fault condition

VSD is calling
fault 24 overspeed
Diagnostics call to check the adequacy of motor T-break up applicability of torque control, break chopper and res.

!

original equipment/ this capacitor functions

This Is the original equipment/ this capacitor functions

Cap enclosure.

None of them fit.

Grainger fan: Dayton 2LY97

Karrie the alternate replacement capacitor for the Dayton 2LY97 fan does not fit in the enclosure and the terminals do not sit under the rubber boot. Do we have a better replacement cap for this standard Granger replacement part?

Thanks!

Working on the brightening the LRC atrium

We will need some new LED floodlights come July 1, 2012

Light Colonnade

I guess this Colonnade is going to be torn down sooner than later.

Olney Hall Way

Which lamp is not produced anymore?
The bright one!

Bright idea Olney Hall Way

300w
Out of production now

OH102 asbestos abatement

When those guys finished, do you think they cleaned inside the light fixtures?

OH102

No power to ceramics streetlight

The pipe is cut and wire interrupted. No power to ceramics streetlight. Break is in straight line between trees 2&3.

PA streetlights

Ceramics 2

track light in FA 215

When I fixed the track light in FA 215 I took the opportunity to aim the front track at the presentation boards and chalkboard. Wattstopper occupancy sensor did not register my entry. Labels have been modified and are clearer. Fluorescent fixture at center back row under heating ductwork has intermittent flicker.

Streetlights

LU100

Finally received the order of high-pressure sodium lamps!

Dance BA lights

These are incandescent lights with a photocell at the first door.

If the District is going to keep these trailers, HID lighting would be appropriate here.

SS Carpet area accounted for

Still need some porcelain extensions

Adorable

We are going to need some more iv "black light" lamps.

COM open door policy

Replaced again the Larco door actuator receiver February 2012. Last failure May 2011

Baseball: $120 a year but $1200 today

I've been here in about 10 years and we have never changed a light bulb on the baseball scoreboard ever.

There's 300 light bulbs in the score board there're three-four dollars each. It's $200 for the day to rent the lift with the delivery costs included. There're some other things also required like something to loosen light bulbs out some hand protection etc. So that's at least $1200.

The useful life of the lamps is 8000 hours which means that after 8000 hours half of them should be finished. So assume they are on 10 hours a week for half the year it should be 10 years before they need a group relamp again. So that amortizes out at $120 a year but $1200 today.

Nice thing is I found a source for light bulbs so instead of $3/4 dollars each I get them for $.79. So that $1200 is going to be closer now to $300 and the baseball team's going to pay for the lift!

Net result is
$30 a year but $300 today.
It just keeps getting better!

How did water get in the electrical?

Not anymore.

Old power / new institutional dw

It was easier to do in my imagination! :p

SS 115v 12a low temperature dishwasher

New low temperature door machine here at student service runs 115v
12amp as per the photo.

If this machine is adequate for the use we certainly have plenty of
power to drive it.

FA tent feed lockout

I locked out the power to the tent feed

PA stairwell lighting

Isolating the short-circuit in the performing arts stairwell.
Default apparently is in emergency circuit four
We also have mixed loads from other panels there's 14 1618 from the
blackbox theater panel